- Secure order
- Easy return shipment
- Service-Hotline +32 50 89 35 27
Dive into the world of creative design with the Casting mould Set "Adonis"! The set of 2 includes a pot with an outer diameter of approx. 14 cm and a height of approx. 11 cm as well as a pot with an outer diameter of approx. 11 cm and a height of approx. 9 cm. With their unique zig-zag structure, they are not only practical casting moulds, but also decorative eye-catchers for your DIY projects.
The plastic pots are particularly flexible and can be easily demoulded so that you can effortlessly remove your finished creations. You can fill them with creative casting slip or concrete and design them individually. Or use them as planters for your houseplants and give them a very special look.
The casting moulds are very easy to use: simply pour the desired mass into the mould, allow to harden and then carefully remove from the mold. The molds are also easy to clean with washing-up liquid and water and can be used again and again.
Surprise yourself and your friends with your unique decorative and craft projects. Order the Casting mould Set "Adonis" now and be inspired by the many possibilities!
Set contents:
1 decorative pot Ø 14 cm, height 11 cm
1 decorative pot Ø 11 cm, height 9 cm
Tips to use:
Preparations:
Mix the desired casting compound according to the instructions. If you wish, you can color it with color pigment powder.
Application:
Slowly pour the mixed casting compound into the casting mould. Leave a rim of at least 2 mm free to make it easier to demould your casting later.
Gently tap the casting mould so that the mixture is evenly distributed and any air bubbles come to the surface. You can then prick these with a lace object.
Time to dry:
Allow the casting compound to harden well. Follow the drying times specified in the instructions for the casting compound.
Work to finish:
You can now demould your casting. If the casting does not come off simply by dropping it, you can carefully loosen the mould all around with your fingers and tap it against the mould.
Good to know:
For detailed moulds, we recommend using a mould release agent or release wax to protect the mould.
