www.vbs-hobby.com 
Exclusive offersNostalgisch dekorierte Holzspulen
Instructions No. 682 Instructions No. 682 Difficulty: Beginner
For this beautiful, extraordinary Christmas decoration, wooden spools with nostalgic napkin motifs and noble are transformed. Leaf metal set Acrylic beads additional light reflections.
Here's how it works
Cut out the motifs from Napkin and remove the two layers of white paper and stick the printed layer onto the wooden spools with Napkin varnish . On the Wooden balls, the round stick and on unglued areas of the wooden spools the Gold leaf priming milk paint and let it dry for about 30 minutes. Then place small pieces of Leaf metal on top and rub on with Bristle brushes and a little pressure
Extra tip: Before working with Leaf metal , place a Handicraft mat on the work surface and catch the Leaf metal which will be rubbed off during application. It can be used again the next time you do handicrafts
Now wipe some stamping ink with a paper towel over the Leaf metal and then finish the individual hangers:
For each hanger you connect the following elements with the help of rings and chain pins: 1 facet drop or pin - 1 pin bead - 1 bead cap - 1 Acrylic ball - 1 bead cap.
The next step is to mount the pendants on a hanging tape: thread Organza ribbon through the eyelet above Acrylic ball , then through an Wooden ball and through the wooden spool, then thread further : 1 Wooden ball - 1 bead cap - 1 facet bead - 1 bead cap.
Secure the Ribbon of each hanger with a knot.
Take a round rod and shorten it to a convenient length for you. Put the large Wooden balls on the ends and hang the wooden spool hands on the rod at different heights. In the apartment, you can fix the Christmas decoration with two more hanging straps on a hook,
Cut out the motifs from Napkin and remove the two layers of white paper and stick the printed layer onto the wooden spools with Napkin varnish . On the Wooden balls, the round stick and on unglued areas of the wooden spools the Gold leaf priming milk paint and let it dry for about 30 minutes. Then place small pieces of Leaf metal on top and rub on with Bristle brushes and a little pressure
Extra tip: Before working with Leaf metal , place a Handicraft mat on the work surface and catch the Leaf metal which will be rubbed off during application. It can be used again the next time you do handicrafts
Now wipe some stamping ink with a paper towel over the Leaf metal and then finish the individual hangers:
For each hanger you connect the following elements with the help of rings and chain pins: 1 facet drop or pin - 1 pin bead - 1 bead cap - 1 Acrylic ball - 1 bead cap.
The next step is to mount the pendants on a hanging tape: thread Organza ribbon through the eyelet above Acrylic ball , then through an Wooden ball and through the wooden spool, then thread further : 1 Wooden ball - 1 bead cap - 1 facet bead - 1 bead cap.
Secure the Ribbon of each hanger with a knot.
Take a round rod and shorten it to a convenient length for you. Put the large Wooden balls on the ends and hang the wooden spool hands on the rod at different heights. In the apartment, you can fix the Christmas decoration with two more hanging straps on a hook,
