Silkscreen Walrus Cushion
Instructions No. 1776Silkscreen -an old technique is being rediscovered! With this technique trendy textiles can be produced
By this printing technique, colour is printed Scraper through a fine-meshed fabric onto the material to be printed. Of course you can print on textiles as well as great papers, wood and ceramic articles. Try it out immediately!
Download the free motif template and print it out. Cut out the pattern carefully with a cutter knife. There are two different possibilities: the negative and the positive template. With the negative template, the lines and shapes of the motif are cut out. These areas are then later white. With the positive stencil, the lines and shapes of the subject remain and the other areas are removed. The finished Stencil one Adhesive tape is glued to the flat side of the screen. Position the screen with the flat side so that it Paper touches the textile.
Now stir the paint well, apply the paint in a line (approx. 1 cm wide) on the upper sieve firing. The paint is then pulled over the motif from top to bottom Scraper with gentle pressure. Check that there is ink on all areas to be printed. If you still see free spots, repeat this procedure and pull the Scraper with even pressure from top to bottom. This will transfer the colour to the textile
Carefully loosen the screen from textile. If you now want to use another colour, wash the screen thoroughly and repeat the procedure with the Scraper. As soon as the printing process is finished, the screen should be cleaned immediately with water. Let the ink dry well
After the ink has dried, fix the textile in the oven for 8 minutes at 150°C or iron it for 3 minutes without steam. After fixing, the textile can be washed at 40 degrees.