- Secure order
- Easy return shipment
- Service-Hotline +32 50 89 35 27
Instructions No. 2925
Difficulty: Beginner
Working time: 3 Hours
Food bowl:
To create a small plate, first glue three blocks together on the long side. Repeat the process a second time. Glue a horizontal partition between the two plates and glue everything together. Finally, glue a horizontal block to each side. This creates two lining surfaces with a partition wall.
Support pillar:
Glue a "U" out of three blocks, as shown in the picture. Glue this inverted "U" in the middle of the feeding tray. Make sure that the feeding area is easily accessible from both sides.
Roof:
Glue an "L" together from two wooden blocks. Do this a total of 9 times. Always glue these "L "s together offset. This creates a straight ridge and spikes at the bottom of the roof. Now glue the roof onto the posts. First place the roof on the scaffolding and plumb the center. Make sure that the vertical posts are flush with the 5th roof batten. Now use a pointed object to paint handicraft glue between the roof and the support posts. Sand down individual areas as required. leave to dry for 12-24 hours. Turn the feeder house over and drizzle handicraft glue between the roof and the supporting pillars from below. Allow this to dry for 12-24 hours as well. Finally, spray the bird feeding house with permanent spray and leave to dry.
